Electric Pottery Wheel Ceramic Machine Work Clay Art Craft DIY

Description

Description:
·
【
EXCELLENT PERFORMANCE
】
Compact structure, small footprint, good mud shielding. The wheel rotates smoothly and the speed is stable ..No-load speed 300RPM, faster and stable
·
【
SAFE AND COMPACT
】
The Ceramic Molding Machine power supply adopts single-phase three-wire access leakage protection device, which is safe and reliable in operation. Suitable for the majority of professionals, and amateur pottery enthusiasts.
·
【
FLEXIBLE DESIGN
】
- Comes with foot pedal for handfree experience. Wheel rotates smoothly with low noise and its rotation direction can be switched clockwise or counterclockwise,can adjust the rotation direction of the turntable and the speed
·
【
ALUMINUM WHEEL ABS & WATER BASIN
】
-Adopts aluminum alloy turntable and a water basin made of ABS material, and the application of leakage protection switch at the bottom of the machine can all guarantee you a pleasant ceramic experience
【
WIDE APPLICATION
】
: This Pottery Wheel Machine is suitable for school ceramic           teaching, pottery bar, DIY shop or home use, to meet the majority of professional,amateur ceramic enthusiasts.
Introduction
The ceramic wheel machine is based on the advanced equipment at home and abroad, based on the combination of professional pottery and children's ceramic teaching and urban entertainment pottery and the actual requirements of the development of a new type of drawing machine.
Specifications
Rated Voltage: AC 110V
Rated Power :350W
Wheel Diameter: 25 cm (9.8")
Speed: 0-300 r/min infinitely variable
Rotate Direction: Positive/negative
Working Noise: <60 dB
Gross Weight: 14.9 kg (32.9 lb)
Package Dimensions (L x W x H): 59 x 46 x 42 cm (23.2" x 18.1" x 16.5")
Operation steps:
1. Insert the power plug of the pottery machine into the 110V power socket, turn on the black leakage protection switch, and the power indicator light is on
2. According to your working habit, turning the rotation direction switch(forward or reverse)
3. Use foot pedal to control speed,the working turntable speed starts to increase until it meets the working speed
Maintenance and cautions:
1. When using the pottery machine, it is recommended to put an extra small water basin in the water basin(on the machine) to facilitate the cleaning of the clay in the hand
2. The water in the basin of the pottery machine must not exceed the height of the turntable bottom
3. Usually pay attention to cleanliness, in case there is clay entering the bearing, long-term accumulation will affect the life of the machine
4. When you don't use the machine, please turn off the leakage protection switch and return the rotation direction switch to its original position